Kama Diesel Water Pump, 3 Inch, 5.5HP - KDP30

Diesel Centrifugal Water Pump 3"

Moving vast quantities of water in industrial dewatering and large-scale agricultural irrigation demands a centrifugal pump with exceptionally high volumetric throughput. The Kama KDP30 is explicitly engineered for these heavy-duty fluid transfer tasks, utilizing enlarged 3-inch (80mm) suction and discharge ports. The mechanical driving force is supplied by a dependable 5 HP (4 kW) KM178F air-cooled, 4-stroke diesel engine. Calibrated to run consistently at 3600 rpm, this engine directly translates its mechanical torque into a formidable maximum flow rate of 66 m³/h. The unit confidently navigates challenging topographical elevations, delivering a total head lift capacity of 28 meters and efficiently drawing water from depths up to 8 meters.

To ensure immediate readiness on demanding job sites, the pumping mechanism incorporates an optimized self-priming chamber that achieves a 4-meter vertical lift in exactly 120 seconds. Operational stability is rigorously maintained by anchoring the engine block and the aluminum pump casing to a robust base frame using thick anti-vibration rubber blocks, effectively eliminating the risk of structural walking during intense fluid extraction. With an operationally balanced weight of 46 kg, the system remains highly deployable across uneven terrain. Supported by a 3.5-liter diesel tank that consumes fuel efficiently at 395 g/kW.h and triggered by a reliable manual recoil starter, the KDP30 offers an independent, high-yield pumping solution for continuous off-grid use.

Key Features & Benefits:

• 3-Inch Fluid Ports: Equipped with enlarged 80mm suction and discharge connections to maximize volumetric intake and facilitate large-scale agricultural and industrial water relocation.

• Massive Flow Rate: Hydrodynamically engineered to displace an impressive 66 cubic meters of water per hour (66 m³/h), significantly accelerating trench dewatering and field irrigation.

• Heavy-Duty Diesel Engine: Driven by a rugged KM178F single-cylinder, air-cooled diesel motor that sustains 5 HP (4 kW) of rated power under severe operational loads.

• High-Elevation Head Lift: Overcomes steep site topographies with a verified total vertical head lift of 28 meters and an 8-meter maximum suction draw.

• Optimized Priming Cycle: Features a highly efficient self-priming internal architecture that establishes a successful 4-meter lift in precisely 120 seconds.

• Structural Anti-Vibration Design: The primary mechanical components are isolated from the tubular frame by thick rubber silent blocks, actively dampening operational tremors and preventing base shifting.

• Extended Fuel Reservoir: Incorporates a 3.5-liter diesel tank operating at an economical consumption metric of 395 g/kW.h, allowing for prolonged continuous duty without frequent refueling interruptions.

• Consistent Mechanical RPM: The internal engine architecture is strictly regulated to maintain a stable rotational speed of 3600 rpm, ensuring unwavering hydraulic pressure throughout the task.